Table of Contents
Advertisement
SL1000
Item No.
08
PBX Access Code
Use this option to enter the PBX Access
Code.
When the system is behind a PBX, this is
the code users dial to access a PBX trunk.
Toll Restriction begins after the PBX ac-
cess code.
For PBX trunks (Program 14-04) the sys-
tem only Toll Restricts calls that contain the
access code.
Always program this option when the sys-
tem is behind a PBX, even if you don't want
Program
to use Toll Restriction.
PBX Access Codes can have up to two dig-
its, using 0-9, #,
21
care).
When using Account Codes, do not use an
asterisk in a PBX access code. Otherwise,
after the
to the central office.
Entries 1~4 correspond to the 4 PBX Ac-
cess Codes.
Each code can have up to two digits.
09
Specific Dial Outgoing Code
10
Outgoing Call Code Setup
Conditions
None
Feature Cross Reference
None
2-220
Item
and LINE KEY 1 (don't
*
, the trunk stops sending digits
*
Table
Input Data
1 ~ 4
Dial
(Up to two digits)
1 ~ 20
Dial
(Up to eight digits)
1 ~ 20
Dial
(Up to four digits)
Program 21 : Outgoing Call Setup
ISSUE 1.1
Default
Tables 1 ~ 4 = No setting
Tables 1 ~ 20 = No set-
ting
Tables 1 ~ 20 = No set-
ting
Hide quick links:
Advertisement
Table of Contents
