Before removing the optical drive connector board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the base enclosure and top cover (see
Remove the optical drive connector board:
▲
Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector (2)
from the tabs to remove it.
Reverse this procedure to install the optical drive connector board.
Subwoofer
Description
Subwoofer for HP ENVY 17 Notebook PC computer models
Subwoofer for HP ENVY 15 Notebook PC computer models
Before removing the subwoofer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
60
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
38).
Optical drive on page
Base enclosure on page
39).
42).
Spare part number
763716-001
763788-001