Cisco ASR 9000 Series System Configuration Manual page 91
Aggregation services router nv
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring QoS on the Satellite System
SUMMARY STEPS
1. configure
2. class-map [type qos] [match-any] [match-all] class-map-name
3. match precedenceprecedence-value
4. end-class-map
5. policy-map [ type qos ] policy-name
6. class class-name
7. set qos-group qos-group-value
8. exit
9. end-policy-map
10. interface type interface-path-id
11. bundle id bundle-id
12. (Optional) l2transport
13. nv
14. service-policy input policy-map
15. commit
16. exit
17. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
class-map [type qos] [match-any] [match-all]
class-map-name
Example:
RP/0/RSP0/CPU0:router(config)# class-map
match-any class2
Step 3
match precedenceprecedence-value
Example:
RP/0/RSP0/CPU0:router(config-cmap)# match
precedence 6
Step 4
end-class-map
Example:
RP/0/RSP0/CPU0:router(config-cmap)#
end-class-map
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
Offloading Service-policy on Bundle Access Port
Purpose
Creates a class map to be used for matching packets to the
class specified and enters the class map configuration mode.
If you specify match-any, one of the match criteria must
be met for traffic entering the traffic class to be classified
as part of the traffic class. This is the default. If you specify
match-all, the traffic must match all the match criteria.
Identifies IP precedence values as match criteria.
• Value range is from 0 to 7.
• Reserved keywords can be specified instead of numeric
values.
Ends the class map configuration.
81
Advertisement
Table of Contents
