free hit counter

Offloading Service-Policy On L2 Fabric Physical Sfl - Cisco ASR 9000 Series System Configuration Manual

Aggregation services router nv
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Offloading Service-policy on L2 Fabric Physical SFL

Command or Action
Step 11
bundle id bundle-id
Example:
RP/0/RSP0/CPU0:router(config-if)# bundle id 2
Step 12
nv
Example:
RP/0/RSP0/CPU0:router(config-if)# nv
Step 13
satellite-fabric-link satellite satellite_id
Example:
RP/0/RSP0/CPU0:router(config-if)#
satellite-fabric-link satellite 100
Step 14
remote-portsinterface_type remote_subslot
Example:
RP/0/RSP0/CPU0:router(config-satellite-fabric-link)#
remote-ports GigabitEthernet 0/0/0-5
Step 15
service-policy output policy-map
Example:
RP/0/RSP0/CPU0:router(config-satellite-fabric-link)#
service-policy output policy4
Step 16
commit
Step 17
exit
Example:
RP/0/RSP0/CPU0:router(config-if)# exit
Step 18
commit
Offloading Service-policy on L2 Fabric Physical SFL
Perform these tasks to offload the service-policy on L2 Fabric physical Satellite Fabric Link (SFL). This
procedure offloads the service-policy in the egress direction of SFL.
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
88
Configuring QoS on the Satellite System
Purpose
Creates a multilink interface bundle with the specified
bundle ID.
Enters the satellite network virtualization (nV)
configuration submode.
Specifies an interface as an Interface Control Plane
Extender(ICPE) inter-chassis link (ICL).
The Interface Control Plane Extender(ICPE)
Note
infrastructure has a mechanism to provide the
Control Plane of an interface physically
located on the Satellite device in the local
Cisco IOS XR software.
Configures the remote satellite ports 0 to 5.
Attaches a policy map to an output interface to be used
as the service policy for that interface.
Returns the router to global configuration mode.

Advertisement

Table of Contents
loading