Creating An Explicit Path With Exclude Srlg - Cisco ASR 9000 Series Configuration Manual
Aggregation services router mpls
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring the Shared Risk Link Groups
Command or Action
Step 6
show srlg interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router# show srlg
interface POS 0/6/0/0
Step 7
show srlg
Example:
RP/0/RSP0/CPU0:router# show srlg
Related Topics
MPLS Traffic Engineering Shared Risk Link Groups, on page 145
Explicit Path, on page 145
Fast ReRoute with SRLG Constraints, on page 146
Importance of Protection, on page 148
Delivery of Packets During a Failure, on page 149
Multiple Backup Tunnels Protecting the Same Interface , on page 149
Weighted-SRLG Auto-backup Path Computation, on page 149
SRLG Limitations, on page 150
Configure the MPLS-TE Shared Risk Link Groups: Example, on page 259
Creating an Explicit Path With Exclude SRLG
Perform this task to create an explicit path with the exclude SRLG option.
SUMMARY STEPS
1. configure
2. explicit-path {identifier number [disable | index]}{ name explicit-path-name}
3. index 1 exclude-address 192.168.92.1
4. index 2 exclude-srlg 192.168.92.2
5. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
214
Purpose
(Optional) Displays the SRLG values configured for a specific
interface.
(Optional) Displays the SRLG values for all the configured interfaces.
Note
You can configure up to 250
interfaces.
Implementing MPLS Traffic Engineering
OL-28381-02
Advertisement
Table of Contents
