Cisco ASR 9000 Series Configuration Manual page 281
Aggregation services router mpls
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing MPLS Traffic Engineering
Resv Info:
Displayed 1 (of 104) heads, 0 (of 0) midpoints, 0 (of 201) tails
Displayed 1 up, 0 down, 0 recovering, 0 recovered heads
This example shows the automatically created backup tunnels.
RP/0/RSP0/CPU0:router# show mpls traffic-eng tunnels auto-tunnel backup tabular
----------------- ----- --------------- --------------- ------ ------ ---- -----
*tunnel-te400
*tunnel-te401
* = automatically created backup tunnel
RP/0/RSP0/CPU0:router# show mpls traffic-eng tunnels auto-tunnel backup brief
* = automatically created backup tunnel
Displayed 2 (of 104) heads, 0 (of 0) midpoints, 0 (of 201) tails
Displayed 2 up, 0 down, 0 recovering, 0 recovered heads
This example shows the attribute-set for auto-backup tunnels.
RP/0/RSP0/CPU0:router# show mpls traffic-eng attribute-set auto-backup
Attribute Set Name: ab (Type: auto-backup)
Number of affinity constraints: 2
Include bit map
Include name
Exclude bit map
Exclude name
Priority: 7 7 (Default)
Record-route: Enabled
Policy-class: 1
Logging: reoptimize, state
List of protected interfaces (count 1)
List of tunnel IDs (count 1)
3000
This example shows the attribute-set for auto-mesh tunnels.
RP/0/RSP0/CPU0:router# show mpls traffic-eng attribute-set auto-mesh
Attribute Set Name: am (Type: auto-mesh)
Bandwidth: 100 kbps (CT0)
Number of affinity constraints: 2
Include bit map
Include name
Exclude bit map
Exclude name
Priority: 2 2
Interface Bandwidth: 0 kbps (Default)
AutoRoute Announce: Disabled
Auto-bw: Disabled
Soft Preemption: Disabled
OL-28381-02
Outgoing:
Explicit Route:
Strict, 24.9.0.2
Strict, 12.9.1.1
Strict, 1.1.1.1
Record Route: Empty
Tspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Session Attributes: Local Prot: Not Set, Node Prot: Not Set, BW Prot: Not Set
Soft Preemption Desired: Not Set
Record Route:
IPv4 24.9.0.2, flags 0x0
IPv4 12.9.1.1, flags 0x0
Fspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Tunnel
LSP
Destination
Name
ID
2
2
TUNNEL NAME
*tunnel-te400
*tunnel-te401
: 0x4
: blue
: 0x2
: red
POS0_3_0_1
: 0x8
: yellow
: 0x2
: red
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configure the MPLS-TE Auto-Tunnel Backup: Example
Source
Address
Address
1.1.1.1
4.4.4.4
3.3.3.3
4.4.4.4
DESTINATION
STATUS
1.1.1.1
up
3.3.3.3
up
Tun
FRR
LSP
Path
State
State Role
Prot
up
Inact Head Inact
up
Inact Head Inact
STATE
up
up
265
Advertisement
Table of Contents
