Cisco ASR 9000 Series Configuration Manual page 299
Aggregation services router mpls
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing GMPLS UNI
SUMMARY STEPS
1. configure
2. mpls traffic-eng
3. gmpls optical-uni
4. controller dwdm interface
5. tunnel-properties
6. tunnel-id number
7. destination ipv4 unicast address
8. path-option 10 no-ero lockdown
9. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
mpls traffic-eng
Example:
RP/0/RSP0/CPU0:router(config)# mpls
traffic-eng
Step 3
gmpls optical-uni
Example:
RP/0/RSP0/CPU0:router(config-mpls-te)# gmpls
optical-uni
Step 4
controller dwdm interface
Example:
RP/0/RSP0/CPU0:router(config-te-gmpls)#
controller dwdm 0/1/0/1
RP/0/RSP0/CPU0:router(config-te-gmpls-cntl)#
Step 5
tunnel-properties
Example:
RP/0/RSP0/CPU0:router(config-te-gmpls-cntl)#
tunnel-properties
RP/0/RSP0/CPU0:router(config-te-gmpls-tun)#
OL-28381-02
Purpose
Enters global configuration mode.
Enters MPLS-TE configuration mode.
Enters GMPLS UNI configuration submode.
Enters GMPLS UNI controller submode.
Enters the submode to configure tunnel-specific information
for a GMPLS UNI controller.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring TE for GMPLS UNI
283
Advertisement
Table of Contents
