Configuring Lsp Diversity: Example - Cisco ASR 9000 Series Configuration Manual
Aggregation services router mpls
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing GMPLS UNI
!
Configuring LSP Diversity: Example
This example shows the configuration for two diverse LSPs:
mpls traffic-eng
attribute-set xro exclude-tun1
extended-tunnel-id 88.0.0.8
attribute-set xro exclude-tun2
88.0.0.8 lsp-id 2
gmpls optical-uni
!
!
Additional References
For additional information related to implementing GMPLS UNI, refer to the following references:
Related Documents
Related Topic
GMPLS UNI commands
OL-28381-02
neighbor nbr_B
ipcc routed
neighbor router-id ipv4 unicast 100.19.19.19
!
controller dwdm 0/1/0/1
neighbor nbr_B
link-id ipv4 unicast 192.168.103.2
neighbor link-id ipv4 unicast 192.168.103.1
neighbor interface-id unnumbered 22
!
!
exclude best-effort lsp source 88.0.0.8 destination 10.0.0.2 tunnel-id 1
!
exclude strict lsp source 88.0.0.8 destination 10.0.1.2 tunnel-id 2 extended-tunnel-id
!
controller dwdm 0/1/0/0
tunnel-properties
logging events lsp-status state
tunnel-id 1
destination ipv4 unicast 10.0.0.2
path-option 10 no-ero xro-attribute-set exclude-tun2
!
!
controller dwdm 0/1/0/1
tunnel-properties
logging events lsp-status state
tunnel-id 2
destination ipv4 unicast 10.0.1.2
path-option 10 no-ero xro-attribute-set exclude-tun1
!
!
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring LSP Diversity: Example
Document Title
GMPLS UNI Commands module in Cisco ASR 9000
Series Aggregation Services Router MPLS Command
Reference
297
Advertisement
Table of Contents
