Table of Contents
Advertisement
Initial Programming
3.5 Dialing mode
If you cannot dial (page 22, 34), change this
setting depending on your telephone line
service. For tone dial service, select "TONE"
(default). For rotary pulse dial service, select
"PULSE".
{A}{B}{<}{>}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {A} or {B} repeatedly to display the
desired setting.
4
Press {SET}.
L The next feature will be displayed.
5
Press {MENU}.
3.6 Date and time
The date and time can be set using the base
unit.
L The other party's fax machine will print the
date and time on each page you send
according to your unit's date and time setting.
L The accuracy of the clock is approximately
±60 seconds a month.
L If a power failure occurs, the date and time
setting may be lost. If the correct date and
{SET}
{MENU}
SYSTEM SETUP
PRESS [( )]
DIALLING MODE
=TONE
[±]
time is not displayed after the power has
been restored, set the date and time again.
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {SET}.
L The cursor (|) will appear on the display.
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} repeatedly to
select "AM", "PM", or 24-hour time entry.
L When neither "AM" nor "PM" are
displayed, 24-hour time entry is selected.
Example: 15:20 (24-hour time entry)
Press {1}{5} {2}{0}.
6
Press {SET}.
L The next feature will be displayed.
7
Press {MENU}.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
3. Preparation
{<}{>}
{MENU}
{SET}
SYSTEM SETUP
PRESS [( )]
SET DATE & TIME
PRESS SET
M:|
0 1/D:01/Y:05
TIME: 00:00
M:08/D:10/Y:05
TIME:
0 0:00
|
M:|
0 8/D:10/Y:05
TIME: 15:20
19
Advertisement
Table of Contents
