Sony STR-DA5300ES Operating Instructions Manual page 30
Hide thumbs
Also See for STR-DA5300ES:
- Operating instructions manual (310 pages) ,
- Service manual (260 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Notes on connecting cables
• We recommend that you use a Sony HOMI
cable.
• We recommend that you use an HOMI cable
with the HOMI logo (made by Sony) for the
HOMI jack corresponding to high speed (an
HOMI version 1.3a, category 2 cable) when
you view images or listen to sound during a
OeepColor transmission or when you watch
a video image of IOSOp or higher.
• We do not recommend using an HOMI-OVI
conversion cable. When you conncct an
HOMI-OVI conversion cable
to
a OVI-O
component, the sound and/or the image may
not be output. Connect other audio cords or
digital connecting cords, then set "Input
Assign" in the Input Option menu when the
sound is not output correctly.
• Before connecting cables, make sure to
disconnect the AC power cord (mains lead).
Notes on HOMI connections
• Check the setup of the connected component
if an image is poor or the sound does not
come out of a component connected via the
HOMI cable.
• An audio signal input to the HOMIIN jack
is output from the speaker output jacks,
HOMI OUT jack and PRE OUT jacks. It is
not output from any other audio jacks.
• A video signal input to the HOMIIN jack
can only be output from the HOMI OUT
jack. The video input cannot be output from
the VIDEO OUT jacks, S VIDEO OUT
jacks or MONITOR VIOEO OUT jacks.
• The audio and video signals of HOMI input
are not output from the HOMI OUT jack
while the receiver menu is displayed.
• When you want to listen to the sound from
the TV speaker, set "HOM I Audio" to
"TV+AMP" in the HOMI settings menu. If
set to "AMP," the sound is not output from
the TV speaker.
• Be sure to turn on the receiver when video
and audio signals of a playback component
are being output to a TV through this
30
GB
receiver. Unless the power is on, neither
vidco nor audio signals will bc transmitted.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HOMI jack
may be suppressed by the connected
component. Check the setup of the
connected component i I' an image is poor or
the sound does not come out of a component
connected via the HOMI cable.
• Sound may be interrupted when the
sampling frequency, the number or channels
or audio rormat or audio output signals from
the playback component is switched.
• When the connected component is not
compatible with copylight protection
technology (HOCP), the image and/or the
sound from the HOMI OUT jack may be
distorted or may not be output.
In this case, check the specification of the
connected component.
• Refcr to the operating instructions of each
component connected for details.
• You can enjoy High Bitrate Audio (OTS-HD
Master Audio, Oolby TrueHO), OSO, multi-
channel Linear PCM only with an HOMI
connection.
• Set the image resolution of the player to
more than nOp/l 080i to enjoy High Bitrate
Audio (OTS-HO Master Audio, Oolby
TrueHO).
• The image resolution of player may need
certai n setti ngs be made before you can
enjoy OSO and multi-channel Linear PCM.
Refer to the operating instructions of the
player.
• Not every HOMI component supports all
functions that are delined by the specified
HOMI version. For example, components
that support HOMI, vcr. 1.3a, may not
support OeepColor.
Advertisement
Table of Contents
