Sony STR-DA5300ES Operating Instructions Manual page 50
Hide thumbs
Also See for STR-DA5300ES:
- Operating instructions manual (310 pages) ,
- Service manual (260 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Tip
Press
8
on lhe
rClllolc
when
"Please
Press
ENTER:' appears on the TV screen.
3
Press .,. repeatedly to select
"Yes," then press
8.
Scts thc auto calibration EQ
to oil.
Explanation
Of'F
Parameter
Tip
The sizc of a speaker (LARGE/SMALL) is
determined by the low characteristics. The
measurement results may vary. depending on the
position of the optimizcr microphone and spcakers,
and the shape of the room. It is recommended that
you follow the measurement results. However. you
can change those settings in the Speaker setlings
menu. Save the measurement results first, then try to
change the settings if you want.
Notes
• After rcflccting the results of a compensation for a
frequency characteristic. signals with a sampling
frequency of more than 96 kHz are always played
back at either 44.1 kHz or 48 kHz.
• The frequency response measurement result is not
utiliz.ed in the following cases.
- The multi-channel input is selected.
- "2ch Analog Direct" is being used.
- Dolby TrucHD signals with a sampling
frequency of more than 96 kHz are being
received.
5
Press
8.
The exit screen appears.
Scts thc frequcncy to onc
that matches that of the
Sony listening room
standard.
Makes the mcasurcment of
frequency from each
speaker flat.
Explanation
Engineer
Full Flat
Parameter
4
Press
+'+
repeatedly to select
the auto calibration type, then
press •.
The measurement results are saved.
Front Referencc Adjusts thc charactcristics
of all the speakers to match
the characteristics of the
front speaker.
50
GB
Advertisement
Table of Contents
