Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
INITIAL SETUP (SETUP WINDOW)
ADVANCED SETUP tab
The number of DVRs that can be connected in this system is initially set to a maximum of 1000 when
using standard specifications. However, if you would like to expand the network further, you can make
the following settings to increase the maximum number of DVRs that can be connected to 4000.
1
2
3
1
Specify the network interface card (NIC).
The NICs that are connected to the
computer are displayed in a drop-down list
box, so specify the NIC.
2
Specify the expansion mode.
Change the "USE MORE THAN 1001
DVRS" setting to "USE".
•
USE: (Expanded mode)
When the number of DVRs to be
connected is more than 1001
•
NO USE: (Default setting)
When the number of DVRs to be
connected is 1000 or less
3
Specify the number of DVRs to be
connected.
When expanded mode (USE) has been
selected, the "MAX NUMBER OF UNITS"
setting can be selected. The number of
DVRs that can be connected in accordance
with the subnet mask setting are displayed
in a drop-down list box, so select the
number to be connected.
English
' ' '
Subnet mask value
255.255.252.0
255.255.248.0
255.255.240.0
In order for the system to operate
normally, select a subnet mask from one
of the four values given above.
4
Click [OK].
Up to the set number of DVRs can now be
connected.
29
(User Level: ID4)
Number of DVRs that
can be connected
– 1,000
1,001 – 2,000
2,001 – 4,000
Advertisement
Table of Contents
