Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
MENU SETTINGS (MENU WINDOW)
TITLE/MOTION SET tab
This sets the motion sensor and camera title settings for each channel. Specify the DVR to be set in the
DVR list in the "TARGET" window, and then click
follow the instructions that appear in the dialog box message to select the setting. The data will be
loaded from the DVR and the window will become active.
This tab is only displayed if the DVR is a DSR-M804/M814 type.
1
2
3
1
Specifying a channel
Select a channel for motion sensor or camera
title setting.
Available settings: CH1/CH2/CH3/CH4
2
MOTION SENSOR Set
When motion sensor is set for monitoring,
alarm recording is carried out automatically
when a moving object is detected. The motion
sensor detection conditions can be set as
follows.
•
Motion detection position
If you click
the specified DVR will be displayed in the
preview window as a still image. Click on
one of the squares in the 5 (width) × 4
(height) matrix in the center of the window.
The sensor setting will alternate between
"ON" and "OFF" each time you click.
•
Background: Sensor ON
•
No background: Sensor OFF
English
, a live image from
3
51
' ' '
(User Level: ID4)
, or double-click the DVR name, and then
•
Sensitivity (Default value: OFF)
Select the sensitivity from the drop-down
list box.
Available settings: OFF/1–10
The lower the value, the higher the
sensitivity.
If using motion sensing to activate
alarm recording, use "ALARM
TRIGGER" in the REC MODE SET tab to
set the activation conditions.
CAMERA TITLE
This sets the camera title for the specified
channel. Type the camera title into the box,
click [APPLY] and then click [OK].
•
Maximum no. of characters: 10
•
Allowable characters:
0–9 / A–Z / - / : / * / . / _ (space)
Default setting:
CH1: 1/CH2: 2/CH3: 3/CH4: 4
Refer to page 19 for explanations of the
setting buttons (CANCEL/APPLY).
Advertisement
Table of Contents
