Dhcp Server Settings - D-Link DIR-809 User Manual

Wireless ac750 dual band router

Hide thumbs Also See for DIR-809:

Table of Contents

Section 3 - Configuration

DHCP stands for Dynamic Host Control Protocol. The DIR-809 has a built-in DHCP server. The DHCP Server will automatically

assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to "Obtain an IP Address Automatically. " When you turn your computers on, they will automatically load

the proper TCP/IP settings provided by the DIR-809. The DHCP Server will automatically allocate an unused IP address from

the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

Enable DHCP

Check this box to enable the DHCP server on your router. Uncheck to disable

Server:

this function.

DHCP IP

Enter the starting and ending IP addresses for the DHCP server's IP

Address

assignment.

Range:

Note: If you statically (manually) assign IP addresses to your computers or

devices, make sure the IP addresses are outside of this range or you may have

an IP conflict.

DHCP Lease

The length of time for the IP address lease. Enter the Lease time in minutes.

Time:

DHCP Client

This displays a list of devices which have received an IP

List:

address from the DHCP server. The Host Name, IP Address,

MAC Address, and Expiration time is listed.

D-Link DIR-809 User Manual

DHCP Server Settings

Table of Contents

Show Quick Links

Table of Contents