Remote Management Unit (Rmu) - Fujitsu SE700 Operating Manual
Hide thumbs
Also See for SE700:
- User manual (374 pages) ,
- Operating manual (86 pages) ,
- Basic operating manual (90 pages)
Table of Contents
Advertisement
ETERNUS LT40 S2 tape library
Actions via the OCP
Some actions can be executed on the tape library using the OCP (and also via the RMU):
Opening a mailslot (menu Commands > Open Mailslot)
●
Unlocking a magazine (menu Commands > Unlock Magazines)
●
Moving cartridges between the slots (menu Commands > Move Media)
●
Initiating an inventory (menu Commands > Reinventory)
●
When the Move Media action is started, the tape library closes Random Mode and operates
in Sequential Mode. Once the operation has been completed, it switches back to Random
Mode. This behavior is logged on the BS2000 system, see
library" on page
i
Shutdown
Pressing the Power On/Off button will initiate a controlled Power Down of the unit.
The following operations will take place before the library shuts down completely:
The LCD display indicates with an appropriate message that the shutdown is in
●
progress
The library finishes all ongoing library and drive activities
●
The robotics is moved to its home position
●
The library switches off the power supply's secondary side
●
i
4.2.3.2
Remote Management Unit (RMU)
Alternatively to the OCP, you can operate the tape library conveniently via the adminis-
tration LAN using a web-based user interface, the Remote Management Console (RMU).
The RMU largely offers the same functionality as the OCP.
A prerequisite for access to the RMU is that a network connection exists and a LAN address
is configured (see the "Operation and Administration" manual [5]).
42
50.
Detach the device while BS2000 is operating (
actions via the OCP.
To abort the shutdown process the user has to press the CANCEL buttor within the
first 3 seconds.
section "Modes of the tape
) before you execute
/DETACH-DEVICE
Periphery
U41861-J-Z126-1-76
Advertisement
Table of Contents
