Wlan Wizard; Wlan Connections - Nokia N85 User Manual
Hide thumbs
Also See for N85:
- User manual (385 pages) ,
- Get started (22 pages) ,
- Sevice manual (20 pages)
Table of Contents
Advertisement
When the device is in the offline profile, you can still
use WLAN, if available. Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the home screen.
WLAN connections
To use a wireless LAN (WLAN) connection, you must
create an internet access point (IAP) for WLAN. Use
the access point for applications that need to
connect to the internet.
A WLAN connection is established when you create
a data connection using a WLAN internet access
point. The active WLAN connection ends when you
end the data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one
WLAN access point device at a time, but several
applications can use the same internet access point.
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device,
38
enter *#62209526# in the home screen.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example,
network found
is displayed, to create an internet
access point (IAP) and start the web browser using
this IAP, select the status and
browsing.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
create a new access point for a hidden WLAN, select
New
WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and
Continue Web
end the connection in the WLAN, select the status
and
Disconnect
WLAN.
If WLAN scanning is off and you are not connected
to any WLAN,
WLAN scanning off
set scanning on and search for available WLANs,
select the status and press the scroll key.
WLAN
Start Web
browsing. To
is displayed. To
Advertisement
Table of Contents
