Xiamen Rongta Technology Co., Ltd. I. Notice Please read the following information carefully before using the printer! 1.1 Safety Notice This printer can only use battery and power adapter provided by our company, or it may cause damage to the printer, battery leakage, fire or explosion.
Xiamen Rongta Technology Co., Ltd. Higher humidity (>/=85%) or lower humidity (</=20%) also may debase the print quality. Use the bad print paper or long time storage paper would affect the print quality, even damage the printer. When the printer is working in black mark detection mode (when printing the pre-print receipt with black mark), it requires the black mark that on the pre-print paper is accord with black mark printing standard (as details in 4.2 Pre-print Black...
Page 5
Xiamen Rongta Technology Co., Ltd. 2. Do not use or place the battery near burner or high temperature environment. Overheating may cause the damage to the resin shell and/or heat insulation material, and bring the short circuit in the battery then lead the overheating, burning and/ or explosion of it.
Xiamen Rongta Technology Co., Ltd. unusual chemistry reaction, then may lead to overheating, burning and/or explosion of II. Introduction 2.1 Printer outer design 1. Feed Key 2. Power Key 3. Status Indicator 4. Charge Indicator 5. Printer Top Cover 6. Body 7.
Xiamen Rongta Technology Co., Ltd. 10. USB Interface 11. Battery Cover 2.2 Accessories Standard Accessories Battery Power Charger Paper Roll CD-ROM Serial Data Wire USB Data Wire Optional Accessories Leather Sheath www.rongtatech.com...
Paper loading way: Clamshell paper loading(as details 3.1.2 Paper Roll Installation); Paper sensor: Power and function indicator of printer flashes when come to paper end meanwhile alarm; Printing Command: ESC/POS compatible with commands set (see “RPP02N Command Set”), the user could get it from the supplier; www.rongtatech.com...
Xiamen Rongta Technology Co., Ltd. Power: 1400 mAH rechargeable li-ion battery Adapter to recharge: battery can be filled with in 3 hours. USB to recharge: battery can be filled with in 6 hours. Notice: The battery to recharge can’t use Adapter and USB at the same time.
Xiamen Rongta Technology Co., Ltd. Press here to open the cover Usage Method: 1. Using two hands to keep pressing the cover then open it. 2. As shown in picture, please put the paper roll in and do not put it in wrong direction, otherwise it would lead the printer unable to work.
Printer's optional accessories contain USB Wire, Connect to PC and install the USB driver 4.3.3 The Bluetooth Matching and Printing Before working, RPP02N/BL portable mini printer need to be matched with primary device, which will drive RPP02N/BL printer, the matching will be started by primary device. Matching Method as follows: www.rongtatech.com...
Bluetooth serial port to the RPP02N/BL portable mini printer for printing. If the PC doesn’t have virtual Bluetooth serial port, and you want to drive the RPP02N/BL portable mini printer, please consult your PC supplier.
Page 13
Xiamen Rongta Technology Co., Ltd. Slow flashing Low level Long lighting Finish charging No flash Long Lighting Power on Status Slow flashing Slow Flashing Lack of paper With a buzz No flash Sow Flashing Sleep status www.rongtatech.com...