Table of Contents
Advertisement
Available languages
Available languages
en
When you set the temperature to 100°C,
the kettle will turn off only after the water
has reached the boiling point, i.e. it will
bubble for a short period of time.
After boiling, let the kettle cool down for
5 minutes before refilling it with water.
Do not turn on the appliance if the kettle 1
is empty, otherwise the overheat control will
engage and the appliance will switch itself
off automatically.
Keep warm setting
You can turn on the keep warm with any
temperature setting.
Press button 7 U lights up, and the function
is activated.
To turn it off, press button 7 again.
The U indicator goes off.
Note: The keep warm feature switches off
automatically after 30 minutes. The kettle
emits a signal.
Cleaning and
maintenance
Risk of electric shock
!
Never immerse the device in water or place
it in the dishwasher!
Do not steam-clean the appliance.
● Before cleaning, unplug the appliance
from the power outlet.
● Clean the outside of the kettle 1 and base
9 with a damp cloth. Do not use strong or
abrasive cleaning agents.
● Remove the limescale filter 8, soak it in a
little vinegar, then rinse clean with clear
water.
● Rinse the kettle 1 and the limescale filter
8 with clear water.
Tip: Clean the stainless steel surface with a
commercial stainless steel care product.
Descaling
Regular descaling
● makes your kettle last longer;
● ensures proper function;
● saves energy.
Descale the kettle 1 with vinegar or a
commercial descaling agent.
● Fill the kettle 1 with water up to the 1.5
mark and bring to a boil. Next, add a
small amount of white vinegar and let it
sit for several hours. You can also use a
commercial descaling product and follow
the manufacturer's instructions.
● Rinse the kettle 1 and the limescale filter
8 with clear water.
Warning: Never use hard objects to
remove limescale residue as this will
damage the seal.
Tip: If you use the kettle daily, descale
more frequently.
Troubleshooting
The kettle does not heat up; the tempera-
ture indicator 5 does not light up.
The overheat control has tripped.
Æ
Æ
● Let the kettle 1 cool down for some time
so that the appliance can be switched on
again.
The unit turns off before the water comes to
a boil.
The kettle contains too much scale.
Æ
Æ
● Descale the kettle as per the instructions.
5
TWK 8610.GB | 05/2014
Advertisement
Table of Contents
