Panasonic DMR-HS2 Operating Instructions Manual page 58
Dvd video recorder
Hide thumbs
Also See for DMR-HS2:
- Operating instructions manual (76 pages) ,
- Operating instructions manual (94 pages)
Advertisement
Connecting
to the L2 input terminals
on the front of
the unit
q
' yelldw white red
S video cable'
#
I #
Audio/Video
cable (included)
SVIDEO
!
OUT
1
.
-
yellr
wilte
Id
I
VIDEO
L
R
i OUT
AUDIO
L
OUT
17
Other video equipment
,;
c
i.LINK
cable
IL (IEEE
-1 1394)
Connect to the video and audio output terminals.
By using the S video cable instead of the yellow video cable you
may make recordings of higher picture quality.
l
If the audio output of the other equipment is monaural, connect to
L/MONO.
(Both left and right channels
are recorded
when
connected through L/MONO.)
*The DV input on this unit is for use with DV equipment only.
l
When DV equipment is connected, it is not possible to operate the
unit from the other equipment.
*Only one piece of DV equipment (e.g., Digital Video Camera) can
be connected to the unit via the DV input terminal.
*The picture compression
system of the DV equipment you have
connected may differ from that used in this unit. in such cases,
dubbing from these equipments will not be possible.
Connecting
to the input terminals
on the rear of the
unit, Ll and L3
q
(included)
S video cable'
Audio/Video
cable
4
llow
4
4
4
---\
red white yellow m
Other video equipment
Connect to the video and audio output terminals.
* By using the S video cable instead of the yellow video cable you
may make recordings of higher picture quality+
if audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
Advertisement
