Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
A
Use the d/u buttons to select Feed Speed and
press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Exiting the Menus
Press W to exit the menus.
Changing the after heater
temperature setting
(SC-F7100 Series only)
Change the after heater temperature during printing.
The default Heater Temperature is 55 °C.
Heater status can be viewed in the control panel. U
"Understanding the Display" on page 18
Note:
❏ Temperature settings can be stored separately for
each media type. U
the Current Media (Print Media Settings)" on
page 57
❏ The time needed for the heaters to reach the specified
temperatures varies with the ambient temperature.
Buttons that are used in the following settings
A
Confirm that the printer is on and press
display the Heating & Drying menu.
User's Guide
Basic Operations
"Saving Optimal Settings for
to
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
Correcting Print
Misalignment (Head
Alignment)
Given that there is a slight gap between the print head
and the media, the landing sites for the different colors
of ink may be affected by humidity, temperature,
inertial forces imparted by the print head, or the
direction of the print head as it moves from right to left
or left to right. As a result, print results may appear
grainy or out of focus. When this happens, perform
Head Alignment to correct the print misalignment.
The thickness of the media determines the distance
between the media and the print head. Head Alignment
values can be stored separately for each type of media.
Stored values can be recalled instantly the next time the
media is used.
In Head Alignment, you can select the following
adjustment methods.
❏ Manual(Uni-D)
Select for unidirectional printing.
❏ Manual(Bi-D)
Select for bidirectional printing.
For Head Alignment, you need to check the pattern and
enter the optimum adjustment value for alignment.
Notes on correct adjustment
The condition of media is important for correct head
alignment.
Observe the following points when loading media.
❏ Head Alignment varies with the media being used.
Load and adjust the media that will be used in the
actual print job.
62
Advertisement
Table of Contents
