Table of Contents
Advertisement
SC-F7100 Series/SC-F7000 Series
B
Remove the Waste Ink Bottle from the Waste Ink
Bottle holder.
Note:
If the backside of the stopper is stained, wipe it.
C
Insert the waste ink tube into the mouth of the
new Waste Ink Bottle and place the Waste Ink
Bottle in the holder.
Tightly seal the lid on the used Waste Ink Bottle.
User's Guide
Maintenance
D
E
F
Replacing the Wiper and Wiper
Cleaner
Replace the wiper cleaner and wiper if the printout is
faint or smudged, or segments are missing even after
cleaning.
78
c
Important:
❏ Be sure to confirm that the waste ink
tube is inserted in the mouth of the
waste ink bottle. Ink will spill onto the
surrounding area if the tube is not
inserted in the bottle.
❏ You will need the lid for the Waste Ink
Bottle when disposing of waste ink.
Keep the lid in a safe place; do not throw
it out.
Lower the stopper.
c
Important:
Confirm that the stopper adheres closely the
mouth of the bottle. If there is a gap, waste
ink may splatter and stain the surrounding
area.
Press the Z button.
Check again to confirm that a fresh Waste Ink
Bottle is correctly placed and then press the Z
button to reset the waste ink counter.
Advertisement
Table of Contents
