Table of Contents
Advertisement
Section 3 – Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in
the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router
will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your
ISP.
Default Gateway
Enter the Gateway assigned by your ISP.
Address:
MTU:
Maximum Transmission Unit - you may
need to change the MTU for optimal
performance with your specific ISP. 1500 is
the default MTU.
MAC Address:
The default MAC Address is set to the
Internet port's physical interface MAC
address on the Broadband Router. It is not
recommended that you change the default
MAC address unless required by your ISP.
You can use the Clone MAC Address
button to replace the Internet port's MAC
address with the MAC address of your
Ethernet card.
Primary DNS
Enter the DNS address assigned by your
Address:
ISP.
D-Link DIR-602 User Manual
Internet
Static IP
22
- Quick Links:
- Features
Hide quick links:
Advertisement
Table of Contents
