free hit counter

Using A Headset; Setting Up The Unit; Maintaining The Unit; Resetting The Unit - Panasonic KX-UTG200 Operating Instructions Manual

Sip phone
Hide thumbs Also See for KX-UTG200:
Table of Contents

Advertisement

Installation and Setup

Using a Headset

If a headset is connected, you must enable Headset
mode by pressing [HEADSET].
Note
The Headset button light shows the current
status as follows:
Off: Headset mode off
Red: Headset mode on

Setting Up the Unit

The user settings can be used to setup the unit by
configuring the settings as required. See Page 39 for
information about the settings.
70
Operating Instructions

Maintaining the Unit

Resetting the Unit

Resetting all settings except for private
settings
Executing "Exclude Private Settings" resets all settings
except for private settings. Private settings include
ringtone volume, brightness, phonebook, and call
history.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Reset", and then press
[ENTER].
3.
Press [ ] or [ ] to select "Exclude Private
Settings", and then press [ENTER].
4.
Press
.
Yes
To cancel, press
Resetting all settings except for network
settings
Executing "Reset Excluding Network Settings" resets
all settings except for network settings. Private settings
are reset in this case. Network settings include IPv4,
IPv6, LLDP Settings, CDP Settings, VLAN Settings,
Speed/Duplex, and Port Mirroring.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Reset", and then press
[ENTER].
3.
Press [ ] or [ ] to select "Exclude Network
Settings", and then press [ENTER].
4.
Press
.
Yes
To cancel, press

Restarting the Unit

When some of the settings on the unit have been
changed via Web user interface programming or
configuration file programming, the unit must be
restarted.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Restart", and then press
[ENTER].
3.
Press
.
Yes
To cancel, press
.
.
No
.
.
No
.
.
No
Document Version 2014-11

Advertisement

Table of Contents
loading