Table of Contents
Advertisement
b) Selecting a mounting location
+
1
c) Mounting the Wireless Keypad
Remove the fixing screw from the bottom of
the Wireless Keypad and remove the back-
plate.
Drill holes (5mm) into the wall to suit the
mounting holes. The mounting plate may be
used as a template.
Insert the wall plugs into the holes and screw
the back-plate to the wall using the screws
provided.
Replace the Wireless Keypad into the
mounting plate by sliding it in at 45º.
Then replace the back plate fixing screw.
Choose a suitable location
Hold the Wireless Keypad in the desired location.
Press and hold the two buttons shown together for 3 seconds
2
The alarm should start sounding.
If the alarm did not sound then the Wireless Keypad relocated slightly closer
to the main unit and retested. Do not mount the Wireless Keypad until it has
proven to work in the chosen location.
Mounting
screws
27
Back-plate
Back-plate fixing
screw
Wall plugs
Advertisement
Table of Contents
