Table of Contents
Advertisement
Installation Preparation
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED}
Tape measure
Knife
_, Spirit level
Wire cutter/stripper
_, Wire nuts
Electric drill with 5/16" and 3/8" bits
Phillips and flat blade screwdrivers
Hammer
_, Pliers
Safetg glasses
_, Duct tape
Tape to mount template
Gloves to protect against sharp edges
!20V 60Hz. 15 or 20
Amp,
2 wire with
ground Properlg grounded branch circuit
Strain relief forjunction
cover
8" round metal duct, length to suit
installation
Saw, jig saw or reciprocating saw
Measuring tape
Pliers
Duct tape
©
Strain relief
Wire nuts
Spirit level
Electric drill
with 5/16"
and 3/8" Bits
Safetg glasses
Phillips
"_
head
screwdriver
Saw, jig saw or
Masking tape
reciprocating
saw
%
Gloves
Knife
Wire cutter/
stripper
Hammer
Flat blade
screwdriver
8" round metal
duct, length to suit
installation
REMOVE THE PACKAGING
CAUTION: L,FT THE H OOD
OUT OF THE B OX
BY THE CENTER METAL PORTION. DO NOT LIFT BY THE
GLASS SIDES.
PRU DENCE : LEVEZ
LA HO_E A
L'EXTERIEURDE LA BO/TE PAR LA PORTION P1ETAL
CENTRAL. NE LEVEZ PAS PAR LES COTES DE VERRE
CAUTION:
Wear gloves to protect against
sharp edges.
PRUDENCE :
Portez des gants pour 6viter
les blessures caus6es par les tranchants.
. Grasp the hood bg the metal insert in the center
and lift straight
up and out of the box.
. Remove and properlg discard the plastic wrapping.
. Remove parts box, duct covers and other
packaging.
Advertisement
Table of Contents
