Installing The System-Fan Assembly; Removing The Psu Card - Dell Precision Tower 7810 Owner's Manual
Hide thumbs
Also See for Precision Tower 7810:
- Quick start manual (2 pages) ,
- Setup manual (3 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Installing the System-Fan Assembly
1.
Place the system fans in the system-fan assembly and attach the grommets.
2.
Place the system-fan assembly in the chassis and connect the screws to secure the system-fan
assembly to the chassis..
3.
Install the
system
board.
4.
Connect the system-fan cables to their connectors on the system board.
5.
Route the system-fan cables out of the opening in the system-fan module in the direction of the
system board.
6.
Connect the screws that secure the drive bay.
7.
Route and connect the system-board cable to its connector.
8.
Install:
a.
PCIe-card retention
b.
memory shroud
c.
optical drive
d.
computer cover
9.
Follow the procedures in
Removing the PSU Card
1.
Follow the procedures in
2.
Remove:
a.
computer cover
b.
PSU
3.
Perform the following steps as shown in the illustration:
a. Slide the PSU cable shroud from its slot towards the front [1].
b. Remove the PSU cable shroud from the computer [2].
34
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Hide quick links:
Advertisement
Table of Contents
