D-Link DIR-412 User Manual page 49

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

The Virtual Server feature allows you to open a single port. If you would like to open a range of ports, refer to the next

page. Configure the parameters, as described below, to create a new Virtual Server entry.

Name:

Enter a name for the rule or select an application

from the drop-down menu. Select an application

and click << to populate the fields.

IP Address:

Enter the IP address of the computer on your

local network that you want to allow the incoming

service to. If your computer is receiving an IP

address automatically from the router (DHCP),

you computer will be listed in the "Computer

Name" drop-down menu. Select your computer

and click <<.

Public Port/

Enter the port number that you want to open next

Private Port:

to Private Port and Public Port. The private and

public ports are usually the same. The private port

is the port being used by the application on the

computer within your local network, and the public

port is the port seen from the Internet side.

Protocol Type:

Select TCP, UDP, or Both from the drop-down menu.

Schedule:

The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the

particular service to always be enabled. You can create your own times in the Tools > Schedules section.

D-Link DIR-412 User Manual

Table of Contents