Table of Contents
Advertisement
System size and weight
The weight of the SAN768B-2 can vary considerably depending on the
combination of blades installed. Use Table 20 and Table 21 to determine the weight
of the system with your combination of port and application blades.
Table 21 lists the weights of the compatible blades and FRUs
Facility requirements
The facility where the SAN768B-2 is in use must meet the following requirements
to provide for correct operation:
v Adequate supply circuit, line fusing, and wire size, as specified by the electrical
126
SAN768B-2 Installation, Service, and User Guide
Table 20. System sizes and weights
System size
Width
Height
Depth (without door)
Depth (with door)
SAN768B-2: 384-port configuration with
eight FC16-48 port blades including two CP
blades, 2 core switch blades. three blowers,
four power supplies, and one cable
management comb
Empty chassis:
v No blades
v No CPs
v No CRs
v No power supplies
v No fan assemblies
Table 21. System FRU weights
FRU
CP blade (CP8)
CR blade (CR16-8)
FC16-32 port blade
FC16-48 port blade
FC8-64 port blade
FX8-24 extension blade
Port card filler panel
Power supply
Blower assembly
WWN bezel
Cable management comb
Chassis door
rating on the chassis nameplate
Size or weight
43.74 cm (17.22 in.)
62.23 cm (24.5 in./14U)
61.29 cm (24.09 in.)
73.20 cm (28.82 in.)
101.3 kg (223.3 lb)
37.3 kg (82.2 lb)
Weight
3.0 kg (6.6 lb)
3.7 kg (8.1 lb)
2.8 kg (6.2 lb) without media
3.3 kg (7.3 lb) without media
3.36 kg (7.4 lb) without media
4.2 kg (9.2 lb) without media
1.5 kg (3.2 lb)
2.45 kg (5.4 lb)
5.73 kg (12.6 lb)
0.3 kg (0.6 lb)
0.45 kg (1.0 lb)
2.09 kg (4.6 lb.)
Advertisement
Table of Contents
Troubleshooting
