Table of Contents
Advertisement
Set the door aside for later reinstallation.
Note: Reinstall the chassis door once the chassis is installed and all cabling and
Figure 6. Chassis door removal
Remove the cable management comb (see "Removing and installing a cable
management comb" on page 68), and set the parts aside for later reinstallation.
Using the lift tool, the 24–inch load plate, and the bridge tool
Step 1 on page 21 through step 9 on page 22 describe how to use the lift tool (PN
09P2481) and the 24–inch load plate (PN 11P4369) to install a SAN768B-2 in the
cabinet. Step 10 on page 22 through step 23 on page 24 describe how to install the
bridge tool (PN 18P5855) in the cabinet for the lower SAN768B-2 or the upper
SAN768B-2. This procedure uses parts from the 14U chassis mount kit. See "Items
required" on page 102 for a list of these parts.
20
SAN768B-2 Installation, Service, and User Guide
configuration is complete. The chassis door must be installed to ensure the
SAN768B-2 meets EMI and other regulatory certifications.
CAUTION:
A fully populated SAN768B-2 weighs approximately 159.2 kg (351 lb)
and requires a minimum of two people and a lift tool to install it.
(C011)
55 kg ( 121.2 lbs)
Advertisement
Table of Contents
Troubleshooting
