Table of Contents
Advertisement
See "FX8-24 blade" on page 131 for information about trunking groups on this
blade.
Table 6 describes the port and application blade LED patterns and the
recommended actions for those patterns.
Table 6. Port and application blade LED descriptions
LED purpose
Blade power LED
Blade status LED
56
SAN768B-2 Installation, Service, and User Guide
Color
Steady green
No light (LED is off)
No light (LED is off)
Steady amber
Slow-flashing amber (on 2
seconds, then off 2 seconds)
Fast-flashing amber (on 1/2
second, then off 1/2 second)
Status
Blade is enabled.
Blade is not powered on.
Blade is either healthy or does
not have power.
Blade is faulty.
Blade is not seated correctly or
is faulty.
Environmental range exceeded. Check for out-of-bounds
Recommended action
No action required.
Ensure that the blade is firmly
seated and either the
thumbscrew is fully engaged
or the slider is pushed up and
the ejectors are fully engaged.
Verify that the power LED is
on.
Ensure blade is firmly seated
and check status by entering
the slotShow command. If
LED remains amber, contact
IBM.
Pull blade out and reseat it. If
the LED continues to flash,
replace the blade.
environmental condition and
correct it.
Advertisement
Table of Contents
Troubleshooting
