2.2 Jumper Settings
The PCI-1002 has only one jumper. JP1 is used to select the
analog input type. For single-ended inputs, users should connected
Pins 1&3 and Pins 2&4. For differential inputs, Pins 3&5 and Pins 4&6
should be connected.
JP1
1
5
Single-ended
Inputs (Default
2.3 AD Calibration
•
AD Calibration for PCI-1002 card
Step 1: Apply +10V to channel 0.
Step 2: Apply +0V to channel 1.
Step 3: Apply -10V to channel 2.
Step 4: Run DEMO6.EXE.
Step 5: Adjust VR1 until channel 0 = fff or ffe
Step 6: Adjust VR2 until channel 1 = 800 or 801
Step 7: Adjust VR3 until channel 2 = 000 or 001
Step 8: Repeat Step 4, Step 5, Step 6 until all are Ok.
PCI-1002 User's Manual (Ver. 2.4, Mar./2004, PPH-015-24) ---- 13
JP1
2
1
6
5
Differential
Inputs
)
2
6
VR1, VR2, VR3