Configuration > Link Aggregation > Lacp Port Settings - D-Link DGS-1210/ME User Manual
Metro ethernet switch series
Hide thumbs
Also See for DGS-1210/ME:
- Reference manual (522 pages) ,
- Hardware installation manual (53 pages) ,
- Hardware installation manual (52 pages)
Table of Contents
Advertisement
4 Configuration
Link Aggregation Algorithm: Specify the algorithm to be MAC Source, MAC Destination, MAC Source
Destination, IP Source, IP Destination or IP Source Destination, and then click Apply to implement changes
made.
Edit Trunking Information:
Specify the ID, Type and Master Port then select the ports to be grouped together, and then click Apply to
activate the selected Trunking groups. Two types of link aggregation can be selected:
Static - Static link aggregation.
LACP - LACP (Link Aggregation Control Protocol) is enabled on the device. LACP allows for the
automatic detection of links in a Port Trunking Group.
Disable - Remove all members in this trunk group.
Configuration > Link Aggregation > LACP Port Settings
The LACP Port Settings is used to create port trunking groups on the Switch. The user may set which ports
will be active and passive in processing and sending LACP control frames.
From Port: The beginning of a consecutive group of ports may be configured starting with the selected port.
To Port: The ending of a consecutive group of ports may be configured starting with the selected port.
Port Priority (0-65535): Displays the LACP priority value for the port. Default is 128.
Activity: There are two different roles of LACP ports:
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.64 – Configuration > Link Aggregation > Port Trunkings
NOTE: Each combined trunk port must be
connected to devices within the same VLAN
group.
Figure 4.65 – Configuration > Link Aggregation > LACP Port Settings
3
7
3
7
Hide quick links:
Advertisement
Table of Contents
