Qos > Priority Settings; Rmon > Rmon Basic Settings - D-Link DGS-1210/ME User Manual
Metro ethernet switch series
Hide thumbs
Also See for DGS-1210/ME:
- Reference manual (522 pages) ,
- Hardware installation manual (53 pages) ,
- Reference manual (465 pages)
Table of Contents
Advertisement
4 Configuration
Select QoS Mode: Specify the mode to be DASP or TOS.
From DSCP value / To DSCP value: Specify the range of DSCP values.
Class ID: Specify the priority queue for the switch. The value is from 0 to 3.
Click Apply to implement changes made.
QoS > Priority Settings
The Priority Setting page allow users to configure the CoS priority settings on a port or ports. When CoS
tagged packets arrive on the switch, they are mapped to the settings configured here. For example, if a port
has been assigned a MAC priority, the packet that has the CoS priority assigned to a MAC address will be
sent to the CoS queue configured for that MAC address. Once the configuration has been completed, users
may see the results in the Priority Settings Table seen here. After configuring the port priorities, users may
adjust the individual CoS settings on the other windows located in the CoS folder of the Switch.
From Port/To Port: Users may select a port or group of ports to assign the priority settings.
Port Priority: Specify the Port Priority is Off or On on the port.
Ethernet Priority: Specify the Ethernet Priority is Off or 802.1p on the port.
IP Priority: Specify the IP Priority is Off or DSCP on the port.
Click Apply to implement changes made.
RMON > RMON Basic Settings
Users can enable and disable remote monitoring (RMON) status for the SNMP function on the Switch. In
addition, RMON Rising and Falling Alarm Traps can be enabled and disabled. Click Apply to make effects.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.103 - QoS > DSCP Priority Settings
Figure 4.104 - QoS > Priority Settings
6
1
6
1
Hide quick links:
Advertisement
Table of Contents
