Security > Access Authentication Control > Authentication Policy Settings; Security > Access Authentication Control > Application Authentication Settings; Security > Access Authentication Control > Authentication Server Group - D-Link DGS-1210/ME User Manual
Metro ethernet switch series
Hide thumbs
Also See for DGS-1210/ME:
- Reference manual (522 pages) ,
- Hardware installation manual (53 pages) ,
- Hardware installation manual (52 pages)
Table of Contents
Advertisement
4 Configuration
Security > Access Authentication Control > Authentication Policy Settings
This feature will enable an administrator-defined authentication policy for users trying to access the Switch.
When enabled, the device will check the Login Method List and choose a technique for user authentication
upon login.
Figure 4.128 – Security > Access Authentication control > Authentication Policy Settings
Authentication Policy: Use the pull-down menu to enable or disable the Authentication Policy on the Switch.
Response Timeout (0 - 255): This field will set the time the Switch will wait for a response of authentication
from the user. The user may set a time between 0 and 255 seconds. The default setting is 30 seconds.
User attempts (1 - 255): This command will configure the maximum number of times the Switch will accept
authentication attempts. Users failing to be authenticated after the set amount of attempts will be denied
access to the Switch and will be locked out of further authentication attempts. Command line interface users
will have to wait 60 seconds before another authentication attempt. Telnet and web users will be
disconnected from the Switch. The user may set the number of attempts from 1 to 255. The default setting is
3.
Click Apply to implement configuration changes.
Security > Access Authentication Control > Application Authentication Settings
The Application Authentication Settings page allows user to configure switch configuration applications
(Console, Telnet, SSH, HTTP) for login at the user level and at the administration level (Enable Admin)
utilizing a previously configured method list.
Figure 4.129 – Security > Access Authentication control > Application Authentication Settings
Application: Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for Console, Telnet application, SSH and the WEB (HTTP)
application.
Login Method List: Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or other Method List
configured by the user.
Enable Method List: Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or other Method List
configured by the user.
Click Apply to implement configuration changes.
Security > Access Authentication Control > Authentication Server Group
A server group is a technique used to group TACACS+ and RADIUS server hosts into user-defined
categories for authentication using method lists. The user may define the type of server group by protocol or
by previously defined server group. The Switch has three built-in Authentication Server Groups that cannot
be removed but can be modified.
To add a user-defined group to the list, click the Add button in the Authentication Server Group page.
DGS-1210 series Metro Ethernet Managed Switch User Manual
7
5
7
5
Hide quick links:
Advertisement
Table of Contents
