Firmware Update Settings Parameters; Update Handsets Parameters; Update Base Stations Parameters - Toshiba IP4100 Installation Manual
Hide thumbs
Also See for IP4100:
- User manual (23 pages) ,
- User manual (36 pages) ,
- Product bulletin (20 pages)
Table of Contents
Advertisement
BASE STATION CONFIGURATION
Table 3-15 Firmware Update Settings Parameters
Parameter
Firmware update server
address
Firmware path
Table 3-16 Update Handsets Parameters
Parameter
Handset Type
Required Version
Table 3-17 Update Base Stations Parameters
Parameter
Required Version
Update this base station only
Update all base stations
IP4100 Install Sept., 2013
Enter the IP address or URL of the server that hosts the firmware update
files. This server must be available before starting an update.
Enter the path of the firmware update folder (see
32).
If you have more than one hardware version or handset model on your system,
each detected handset type will be displayed here.
Enter the version of the firmware that will be used to update each type of
handset. This field must match the last 3 digits of the name of the firmware file.
Note:
Firmware file versions are independent for each handset type. Be
sure you enter the correct version number for the specific type of
handset.
Note:
When the firware update is complete set this field to 0.
If the required version field for any handset type contains a value
other than 0, clicking Save will start the firmware update process
for that handset type.
Enter the version of the firmware that will be used to update the
base station. This field must match the last 3 digits of the name
of the firmware file.
Update the firmware on the currently connected base station.
Update the firmware on all base stations in this system.
Description
Table 1-10
Description
Description
Network Screen
on
page 1-
3-13
Hide quick links:
Advertisement
Table of Contents
