4
With the FUNC button held down,
press the SELECT/ENTER dial.
The selected file is loaded.
To change the file selection
Rotate the SELECT/ENTER dial to select
"CANCEL", and then press the dial.
5
Select "Duration", and then rotate the
ADJUST knob or the SELECT/ENTER
dial to set the time (seconds) from the
start to the end of the ramp.
6
Press the HOME button to return to the
HOME screen.
7
With the FUNC button held down,
press the SELECT/ENTER dial twice.
A screen like the following appears, allowing
you to check the settings.
8
With the FUNC button held down,
press the SELECT/ENTER dial.
Variation of the number of frames shot
begins along the selected curve.
To create a curve file
1
Insert a "Memory Stick" into the
Memory Stick slot of the PC.
For details on "Memory Stick" operations, see
"Using a "Memory Stick"" (page 173).
108
Select FPS Function
2
Open a new file in a text editor.
3
Enter two or more number of frames
shot values. Enter each value on its own
line.
4
Save the file as a CSV file (file extension
".csv") in the "Memory Stick" (located
in /MSSONY/PRO/VTR/SRW9000).
Note
If you specify a folder other than the above folder,
the function does not work.
For example, you could enter the following
values.
10
50
6
30
24
24 60
30
A curve like the following is produced when
you save the values entered in the text file as
a CSV file.
Duration
Ramp start
To vary the number of frames shot
manually
Set the number of frames shot manually if you
want to set upper and lower number of frames
shot limits.
Operating mode: Manual
1
Rotate the ADJUST knob or the
SELECT/ENTER dial to set the Manu
Spd1 and Manu Spd2 items.
Manu Spd1: The upper or lower limit of the
number of frames shot (FPS)
Manu Spd2: The upper or lower limit of the
number of frames shot (FPS)
(This is the lower limit when the upper
Ramp end