Upper Panel; Control Panel - Sony SRW-9000 Operation Manual
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (207 pages)
Table of Contents
Advertisement
l AUX IN (auxiliary input) connector
(BNC type) (when the HKSR-9001 is
installed)
Connect an external device to increase the
number of audio input channels, or to synchronize
this unit to the output of an HD device.
m HD SDI MON2 (HDSDI monitor
output 2) connector (BNC type)
Use in the same way as the HD SDI MON1
connector on the left-side panel (see page 16).
Upper Panel
Control panel
(page 20)
With control panel detached
a Lock release button
When removing the control panel, use this button.
For details, see "Attaching the Control Panel" (page
35).
b Handle
Use to carry the unit.
You can attach an accessory to the seven screw
3
1
holes (
/
" × 4,
/
" × 3) on the top of the handle.
8
4
You can also attach the CAC-12 microphone
holder to the side of the handle.
For details, see "Using a Microphone" (page 32).
c Assistant panel attachment screws
Attach the optional AP-1 Assistant Panel or the
CAC-12 microphone holder.
20
Locations and Functions of Parts
For details, see "Attaching the AP-1 Assistant Panel
(Optional)" (page 37) or "Using a Microphone"
(page 32).
d Cable holder attachment screws
Attach the supplied cable holder to hold the cable
of the control panel or the optional AP-1 Assistant
Panel.
e Accessory attachment screw holes
You can attach accessories to the two screw holes
3
1
(
/
" × 1,
/
" × 1).
8
4
f EJECT button
Pressing this button opens the lid of the cassette
insertion slot, allowing you to take out the
inserted cassette.
Control Panel
The control panel is used mainly for control of the
VTR module.
a VTR menu selection buttons
Select one of the VTR menus or the Camera menu
to be shown on the display.
HOME button: Displays the HOME screen. The
HOME screen displays audio levels,
operating status, warnings, time data, and
other information.
TC button: Displays the TC (timecode) Setup
menu (see page 154). This menu allows you
to switch between LTC and VITC, to switch
between DF and NDF, and to display
timecode on an external monitor.
VIDEO button: Displays the VIDEO Setup
menu. The menu allows you to perform
Camera menu operations (see page 111).
AUDIO button: Displays the AUDIO Setup
menu (see page 157). This menu allows you
to make settings related to audio.
Advertisement
Table of Contents
