Sony SRW-9000 Operation Manual page 43
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (177 pages)
Table of Contents
Advertisement
The speed value for a given shutter angle
varies depending on the selected video
format and frame rate.
To select the frame rate (number of frames to
shoot)
When the optional HKSR-9002 is installed, and
you have selected the Select FPS video format,
select the frame rate (number of frames to shoot).
Note
The frame rate cannot be changed when a format other
than Select FPS is selected.
1
Move the cursor to the left of the frame
rate (4 in the figure).
2
Turn the MENU SEL/ENTER dial to
select the desired frame rate (number of
frames to shoot).
To use a compensation mode
When the optional HKSR-9002 is installed, you
can compensate for changes in the video level that
occur when the frame rate (number of frames to
shoot) is changed. There are two compensation
modes, which compensate by adjusting the
shutter angle or electrical gain.
1
Move the cursor to the left of "CMP"
(5 in the figure).
2
Turn the MENU SEL/ENTER dial to
select the compensation mode to use.
AC (angle compensation mode): When the
frame rate is changed, the video level is
held constant by automatically adjusting
the shutter angle.
GC (gain compensation mode): When the
frame rate is changed, the video level is
held constant by automatically adjusting
the electrical gain. The shutter angle is
held constant.
See "Detailed Shutter Settings" (page 68) for details
about compensation modes and about compensation
mode menu operations.
When you are not using the shutter
Select OFF at 3.
The shutter value indication at 2 becomes "----".
To change the registered shutter values
You can change registered shutter step values in
the <SHUTTER ASSIGN> page of the Camera
>USER (OPERATION) menu.
For details on how to operate the Camera menu, see
"Basic Camera Menu Operations" (page 111).
You can also use the <SHUTTER> page of the
Camera >USER (PAINT) menu to change a
registered shutter step value.
See "Detailed Shutter Settings" (page 68) for more
information about the <SHUTTER> page.
<SHUTTER ASSIGN> page
STEP 1-8
On each line, the [deg] column displays a
registered shutter angle. The [sec] column
displays the corresponding shutter speed value,
converted according to the currently selected
frame rate.
ADD
Use this to register new shutter step values.
Display the shutter angle you wish to register, and
then press the MENU SEL/ENTER dial. You can
select angle values in the range from 360.0 to 4.3
degrees. Shutter step values are sorted
automatically in descending order. If eight values
have been already registered, the message
"STEPS FUL" appears, and a new value cannot
be added. In this case, use DEL (see the following
section) to delete an unneeded value beforehand.
DEL
Use this to delete registered shutter step values.
When the pointer is positioned at DEL, an
asterisk (*) appears to the left of STEP 1.
Move the asterisk to the left of the value you wish
to delete, and then press the MENU SEL/ENTER
dial. That value is deleted, and the items after the
deleted one are automatically renumbered.
Basic Settings with the Subdisplay
43
Advertisement
Table of Contents
