Displaying The Filter Status; Selecting Gain, Color Temperature, And White Balance Values - Sony SRW-9000 Operation Manual
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (207 pages)
Table of Contents
Advertisement
<FORMAT MEMORY> page
Move the cursor to the item you want to select,
and press the MENU SEL/ENTER dial to change
the registered format.
Displaying the Filter Status
Select 00:NO ASSIGN if you want to make the
selected number into an empty number.
Displaying the Filter Status
To respond to various lighting conditions, optical
neutral density (ND) filters and optical color
temperature conversion (CC) filters are built into
this unit. The selectable filters are identified with
the following alphanumeric codes.
Indication Selected
filter
ND:1
CLEAR
ND:2
ND0.6
1
(
/
ND)
4
ND:3
ND1.2
1
(
/
ND)
16
ND:4
ND1.8
1
(
/
ND)
64
ND:5
CAP
On the subdisplay, you can check the filters
selected with the filter selector knobs.
Optical filter status page
1
3
1: The selected ND filter is displayed.
2: Displays the type of the selected filter.
46
Basic Settings with the Subdisplay
Indication Selected
filter
CC:A
3200K
(Clear)
CC:B
4300K
CC:C
5600K
CC:D
6300K
CC:E
ND0.3
1
(
/
ND)
2
2
4
3: The selected CC filter is displayed.
4: Displays the color temperature corresponding
to the filter selected at 3.
When the optional HKSR-9004 is installed, ND
and CC filters can be switched on this page.
Selecting Gain, Color
Temperature, and White Balance
Values
The setting items and values in Cine mode and
Custom mode are different.
In Cine mode: Gain setting page
1
1: You can select the gain value from among the
following: –6 dB, –3 dB, 0 dB, 3 dB, 6 dB, 9
dB, and 12 dB (the factory default is 0 dB).
The corresponding ISO sensitivity is
displayed in parentheses.
2: Displays either a dynamic range or a latitude
(see ("ISO sensitivity and dynamic range
indications" page 47)).
The second line selects the color temperature
filter. You can select TUNGSTEN or
DAYLIGHT.
With DAYLIGHT, electrical gain 5600K is on.
The white balance is fixed at the preset value
(3200K).
In Custom mode: Gain setting page
3
The first line is in common with Cine mode (page
46).
3: Turn on/off Electrical gain 5600K (the
factory default is off).
4: Select the white balance setting (the factory
default is W:P).
2
4
Advertisement
Table of Contents
