Toshiba Satellite L40 series Resource Manual page 44
Hide thumbs
Also See for Satellite L40 series:
- User manual (190 pages) ,
- User manual (29 pages) ,
- User manual (204 pages)
Table of Contents
Advertisement
44
If something goes wrong
Clearing the condition may get the computer running, but it will not
solve a resource conflict. Read the documentation that came with
the conflicting device and "Resolving a hardware conflict" in your
electronic user's guide.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numlock light or cursor control
mode light is on, press
light, or
If the problem occurs when both the keypad overlays are off, make
sure the software you are using is not remapping the keyboard.
Refer to the software documentation and check that the program
does not assign different meanings to any of the keys.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by pressing
and
Fn
F1
any key, type the password and press
registered, press any key. The screen reactivates and allows you to
continue working.
If you are using the built-in screen, make sure the display priority is
not set for an external monitor. To do this, press
simultaneously (once). If this does not correct the problem, press
and
F5
simultaneously again to return the display priority to its
previous setting.
If you are using an external monitor:
❖ Check that the monitor is turned on.
❖ Check that the monitor's power cord/cable is firmly plugged
into a working power outlet.
❖ Check that the cable connecting the external monitor to the
computer is firmly attached.
❖ Try adjusting the contrast and brightness controls on the
external monitor.
❖ Press
priority is not set for the built-in screen.
Fn
Fn
+
F11
to turn off the numlock light.
simultaneously. If you have registered a password, press
HINT: Holding the Fn key and pressing the F5 key several times will
advance you through the display options.
Fn
and
F5
simultaneously to make sure the display
+
to turn off the cursor control mode
F10
. If no password is
Enter
Fn
and
F5
Fn
Hide quick links:
Advertisement
Table of Contents
