Advertisement
Quick Links
KT-LCD1 eBike Display User Manual
Dear customer, please read this manual before you use KT-LCD1 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status display.
Functions and Display
1
UP Button
2
SW Button
3
DOWN Button
4
Battery capacity indicator
Km/H
Riding
speed(metric)
MPH
Riding speed
(imperial)
5
MXS
MAX speed
AVS
Average speed
Operation
1. ON/OFF
Hold
button long to turn on the power, and hold
power. When the motor stops driving and when the e-bike is not used for a consecutive 5 minutes, it will
automatically shut down and turn off the motor power supply.
2. Display interface
2.1 Turn on backlight and headlights
TM
Single trip time
6
TTM
Total trip time
7
6Km/H push power assist
Km
Distance(metric)
Mil
Distance (imperial)
8
DST
Trip distance
ODO
Total distance
9
ASSIST
Pas level
long for a second time to turn off the
Hold
button to start up and enter display interface.
V2.5
Hold
long to turn on backlight and headlights (the controller should have headlight drive
output function); hold
long again to turn off the backlight and headlights.
2.2 Assist ratio gear (ASSIST) switch
2.3 6Km/H assist promotion function
2.4 Display and delete of single data
2.5 Display of total trip time and distance
2.6 Display of single maximum speed and average speed
Hold
or
shortly to switch 1-5 file gear. Gear 1 is for
the minimum power, gear 5 is for the highest power. Each startup
will automatically restore the gear shutdown last time. Gear 0 is
without booster function.
Hold
and
flashes, the vehicle drives at the speed
not more than 6Km/h. Release
invalid.
After power on for 5 seconds, hold
same time, single trip riding time (TM) and single trip distance
(DST) flash, hold
button shortly, the content of both is
cleared. If failed holding the button within 5 seconds, it will
automatically return the display interface after 5 seconds, original
content is preserved.
Hold
button shortly to display of total trip time (TTM)
and total trip distance (ODO). hold
return the display interface.In the riding mode after 5 seconds,
automatically returns to display interface.
In the display of total trip time and distance, hold
shortly to display of single maximum speed (MXS)and
average speed (AVS). hold
button shortly again to return the
display interface. In the riding condition, 5 seconds later,
button, the function is
and
at the
button shortly again to
or
Advertisement
Related Manuals for eBike KT-LCD1
Summary of Contents for eBike KT-LCD1
- Page 1 Dear customer, please read this manual before you use KT-LCD1 instrument. The manual will guide 2.2 Assist ratio gear (ASSIST) switch you use the instrument correctly to achieve a variety of vehicle control and vehicle status display.
- Page 2 automatically returns to display interface. diameter. Select the range8,10,12,14,16,18,20,22,24,26,700c and 28 inches. Hold button shortly 2.7 Battery capacity indicator display and go to the next parameter settings. The meter can automatically identify the battery capacity 3. Set the metric units when the battery capacity indicator is supporting use with the The metric units will be set after finishing setting wheel specified controller.