Iscsi Target Port - Dell Z9500 Command Reference Manual

Table of Contents

iscsi target port

Configure the iSCSI target ports and optionally, the IP addresses on which iSCSI communication is

iscsi target port [tcp-port-2...tcp-port-16]ip-address [ip-

To remove the configured iSCSI target ports or IP addresses, use the no iscsi

target port command.

port-2...tcpport

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

You can configure up to 16 target TCP ports on the switch in one command or

multiple commands.

When you use the no iscsi target port command and the TCP port you wish

to delete is one bound to a specific IP address, the IP address value must be

included in the command.

Introduced on the Z9500.

Enter the tcp-port number of the iSCSI target ports. The

tcp-port-n is the TCP port number or a list of TCP port

numbers on which the iSCSI target listens to requests.

Separate port numbers with a comma. The default is 860,

Enter the ip-address that the iSCSI monitors. The ip-address

specifies the IP address of the iSCSI target.

Introduced on the Z9500.

iSCSI Optimization