Distance - Dell Z9500 Command Reference Manual

Table of Contents

distance

Define the administrative distance for learned routes.

distance weight [ip-address mask [prefix-list]]

To return to the default values, use the no distance weight command.

weight = 115

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Intermediate System to Intermediate System (IS-IS)

— Enter ROUTER mode on the switch.

The administrative distance value indicates the reliability of a

routing information source. The range is from 1 to 255. (A

higher relative value indicates lower reliability. Routes with

smaller values are given preference.) The default is 115.

(OPTIONAL) Enter an IP address in dotted decimal format

and enter a mask in either dotted decimal or /prefix format.

(OPTIONAL) Enter the name of a prefix list name.

ROUTER ISIS (for IPv4)

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.