Show Lacp - Dell Z9500 Command Reference Manual

Table of Contents

show lacp

Display the LACP matrix.

show lacp port-channel-number [sys-id | counters]

port-channel-

Without a Port Channel specified, the command clears all Port Channel counters.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Example (Port-

Dell#show lacp 1

Port-channel 1 admin up, oper up, mode lacp

Partner System ID:Priority 32768, Address 0001.e801.45a5

A-Active LACP, B-Passive LACP, C-Short Timeout, D-Long Timeout

E-Aggregatable Link, F-Individual Link, G-IN_SYNC, H-

I-Collection enabled, J-Collection disabled, K-Distribution

Link Aggregation Control Protocol (LACP)

Enter a port-channel number. The range is from 1 to 128.

(OPTIONAL) Enter the keywords sys-id and the value that

identifies a system.

(OPTIONAL) Enter the keyword counters to display the

LACP counters.

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

System ID:Priority 32768, Address 0001.e800.a12b

Actor Admin Key 1, Oper Key 1, Partner Oper

LACP LAG 1 is an aggregatable link