Dell Z9500 Command Reference Manual page 1150
Hide thumbs
Also See for Z9500:
- Reference manual (1849 pages) ,
- Configuration manual (953 pages) ,
- Installation manual (47 pages)
Table of Contents
Advertisement
Column Heading
VlanId
Mac Address
Type
Interface
State
Example
Dell(conf)#do show mac-address-table
Codes: *N - VLT Peer Synced MAC
VlanId
Address
2
128
2
10
2
100
2
10
Usage
The following describes the show mac-address-table command shown in the
Information
following example.
Column Heading
VlanId
Mac Address
Type
Interface
1150
Description
Displays the VLAN ID number.
Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Lists whether the MAC address was manually configured
(Static), learned dynamically (Dynamic), or associated with a
specific port (Sticky).
Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
•
po — Port Channel then a number. The range is from 1
to 255 for TeraScale.
•
te — 10-Gigabit Ethernet then a slot/port.
•
fo — 40-Gigabit Ethernet then a slot/port.
Lists if the MAC address is in use (Active) or not in use
(Inactive).
Mac
Type
00:00:00:00:00:01
Active
00:00:00:00:00:02
Active
00:00:00:00:00:03
Active
00:00:00:00:00:04
Active
Description
Displays the VLAN ID number.
Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Lists whether the MAC address was manually configured
(Static), learned (Dynamic), or associated with a specific port
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
•
po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
•
te — 10–Gigabit Ethernet followed by a slot/port.
•
fo — 40-Gigabit Ethernet then a slot/port.
Interface
State
Dynamic (N)
Po
Dynamic (N)
Po
Dynamic
Dynamic
Po
Po
Layer 2
Advertisement
Table of Contents
