Virtual Lan (Vlan) Commands - Dell Z9500 Command Reference Manual

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell#show mac learning-limit

Dell#show mac learning-limit interface gig 1/0

Virtual LAN (VLAN) Commands

The following commands configure and monitor virtual LANs (VLANs). VLANs are a virtual interface and

use many of the same commands as physical interfaces.

You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP,

ACLs and SNMP are not supported on a VLAN.

Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN

interface may continually switch between Master and Backup.

NOTE: For more information, refer to

portmode hybrid

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Added the vlan option on the E-Series.

Introduced on the C-Series.

Added support for the violate-action and detail

Added support for Port Channel.

VLAN Stacking

and VLAN-related commands, such as