Show Fefd - Dell Z9500 Command Reference Manual

Table of Contents

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

If you enter only the fefd-global syntax, the mode is normal and the default

interval is 15 seconds.

If you disable FEFD globally (no fefd-global), the system does not remove the

FEFD interface configuration.

show fefd

View FEFD status globally or on a specific interface.

show fefd [interface]

interface is placed in "error-disabled" state, t enter the fefd

reset command to reset the interface state.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

— enables far-end failure detection.

fefd-global interval

— configures an interval between FEFD control packets.

— shows the FEFD command output.

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/ port information.