Debug Lldp Interface - Dell Z9500 Command Reference Manual

Table of Contents

debug lldp interface

To display timer events, neighbor additions or deletions, and other information about incoming and

outgoing packets, enable LLDP debugging.

debug lldp interface {interface | all}{events | packet {brief |

detail} {tx | rx | both}}

To disable debugging, use the no debug lldp interface {interface |

all}{events} {packet {brief | detail} {tx | rx | both}}

Introduced on the E-Series.

Enter the following keywords and slot/port or number

information:

For a Fast Ethernet interface, enter the keyword

FastEthernet then the slot/ port information.

For a 10-Gigabit Ethernet interface, enter the keyword

tenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

NOTE: The FastEthernet option is not supported on

the S-Series.

(OPTIONAL) Enter the keyword all to display information

on all interfaces.

(OPTIONAL) Enter the keyword events to display major

events such as timer events.

(OPTIONAL) Enter the keyword packet to display

information regarding packets coming in or going out.

(OPTIONAL) Enter the keyword brief to display brief packet

information.

(OPTIONAL) Enter the keyword detail to display detailed

packet information.

(OPTIONAL) Enter the keyword tx to display transmit-only

packet information.

(OPTIONAL) Enter the keyword rx to display receive-only

packet information.

(OPTIONAL) Enter the keyword both to display both receive

and transmit packet information.

Link Layer Discovery Protocol (LLDP)