Multiplier - Dell Z9500 Command Reference Manual

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

protocol lldp (Configuration)

show lldp neighbors

multiplier

Set the number of consecutive misses before LLDP declares the interface dead.

multiplier integer

To return to the default, use the no multiplier integer command.

CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— enables LLDP globally.

— displays the LLDP neighbors.

Enter the number of consecutive misses before the LLDP

declares the interface dead. The range is from 2 to 10.

Introduced on the Z9500.

Introduced on the S4820T.

Link Layer Discovery Protocol (LLDP)