Ip Msdp Sa-Limit - Dell Z9500 Command Reference Manual

Table of Contents

ip msdp sa-limit

Configure the upper limit of source-active (SA) entries in SA-cache.

ip msdp sa-limit number

To return to the default, use the no ip msdp sa-limit number command.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The system counts the SA messages originated by itself and those messages

received from the MSDP peers. When the total SA messages reach this limit, the

subsequent SA messages are dropped (even if they pass RPF checking and policy

If the total number of SA messages is already larger than the limit when this

command is applied, those SA messages that are already in the system continue to

be accepted. To enforce the limit in such situation, use the clear ip msdp sa-

cache command.

ip msdp peer

clear ip msdp peer

show ip msdp

Enter the maximum number of SA entries in SA-cache. The

range is from 0 to 40000.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series.

— configures the MSDP peer.

— clears the MSDP peer.

— displays the MSDP information

Multicast Source Discovery Protocol (MSDP)